1 Choose Placement
We recommend mounting the mouthwash dispenser as high as possible, while still adhering to ADA guidelines for your location.
2 Install Mount
If you are using the Wall Mounting Kit, remove the mounting bracket from the back of the dispenser, and mark on the wall the location for the provided screws. When mounting on tile, it is only necessary to use two screws in the grout joint between the tiles. For other surfaces, please use all four mounting screws. Predrill a hole and insert the plastic sinks. The included adhesive pads are only for temporary use during installation. The unit needs to be mounted using screws to help prevent it from falling off the wall and getting damaged.
If you are using the Glass Mounting Kit, thoroughly clean the location on the glass where the unit is going. Then remove the mounting bracket from the back of the dispenser and apply the “Gorilla Heavy Duty 30 lbs Double-Sided Mounting Tape” to the back of the mounting bracket in three strips down the left, right and middle. Once the glass is completely dry, firmly press the bracket to the glass, and let it set for 6 hours before attaching the dispenser.
3 Attach Cup Dispensers
Remove the cup dispenser from its packaging, and firmly slide the three pieces together. Next, insert the cup dispenser into the grooves on the side of the mouthwash dispenser until it snaps into place. The red button should be facing the user.
Use the set-screw (smallest screw in the bag) to screw the dispenser to the mounting bracket. Place this screw in the hole inside the dispenser located directly above valve. This prevents customers from removing the dispenser from the wall.
5 Load Mouthwash
Remove the cap from the mouthwash bottle to expose the seal. Carefully turn the bottle upside down, and firmly push the bottle onto the valve within the mouthwash dispenser.
6 Inserts Cups
Remove the cups from Their packaging and slide them bottom-first into the cup dispenser.
7 Active Guarantee
After getting your dispenser installed, please activate the unit’s guarantee by visiting the setup page.Setup